|
|
| |||||||||||
|
|
|
| ||||||
 |
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the Prop 65 law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example: ABS plastic contains styrene PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP) electrolytic capacitors can contain Ethylene glycol Brass can contain Lead flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA) Aluminum alloys can contain Chromium To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching! |
Product Reviews Click here to review this item | ||
| ||
 |
Nice display | |
| Hello - I ordered a couple of these displays for an outdoor temperature display project. While these look to be of high quality, I found that the information on the data sheet was not what I observed. The driving voltage of each segment is correct at 14VDC (will not work at all at 12V), but the current limiting resistor info is not. I powered a segment through my voltmeter set to measure mA and found that a 15 ohm resistor provided 20 mA current (at 14V). The data sheet says to use a 510 ohm resistor. For the DP, I found that 390 ohms provided 20 mA. Data sheet calls for 680 ohms. With those new resistor values, display is nice and bright! | ||
| - Jeff, FL | ||
